oberon wifi bollard

Designed for permanent or temporary low voltage installations. wifi.

{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. Limited to stock on hand. Diameter Wi-Fi Access Point Bollard Standard, 48 in. However, there may be slight differences in store pricing or inventory compared to what is listed online. Coupons are subject to change without notice. Both are available in a number of colors. ( Length:0, Width:0, Depth:0). Oberon’s NetPoint™ 3032 Wireless Bollard is a cost effective way to extend wireless and Wi-Fi coverage into auditoriums, sports venues, courtyards, malls, and campus open areas permanently or temporarily. Tamper resistant hardware, Construction: nominally 0.25 in. OBERON | 3030-00-BK WI-FI BOLLARD AP ENCLOSURE. Wireless; Wireless Access Point Mounts; Indoor/Outdoor; Bollards Product Reviews. The wireless bollard can be used to mount the Wi-Fi APin locations where Wi-Fi coverage is mo st (See Oberon’s article. A WiFi bollard is a standalone facility which contains the access point, antennas, cabling, and associated powering and switching equipment. To ensure excellent wireless performance, the fiberglass shaft is virtually transparent to wireless signals. Shop 12 in. STUDIO of artificial intelligence, which forms the content of this project. WiFi bollards can be installed permanently in busy areas, or can be deployed temporarily for events.

(1,384 mm) above grade, 12.5 in. Use tamper-resistant screws or hardware to install the equipment or bollard. Prices and specifications are subject to change without notice.

NEMA 3R performance for indoor/outdoor environments. The NDI must carefully consider equipment phys… In many cases, the NDI will consider mounting access points on building walls or on top of buildings, on existing outdoor lighting poles, or even in or on the ground.

Mount AC line circuits in a UL listed, NEMA 4 work box. * Your assessment is very important for improving the work The wireless bollard can be used to mount the Wi-Fi APin locations where Wi-Fi coverage is most needed, and avoiding the need to mount on buildings or light poles. Large enough for APs, omni-directional and directional antennas, and associated equipment from most vendors. outdoor wireless.

211 19 Malmö, Sweden, Javascript must be enabled for sending e-mail, Electronics-Networking_Chatsworth-Products_Wireless-Bollard_3032.rfa. Diameter Netpoint™ Heavy Duty Fiberglass Wi-Fi Access Point Bollard / Standard Style / Black / 57 in. The bollard is comprised of a durable weatherproof fiberglass shaft and adjustable interior equipment stand that allows the installer to place and conceal the AP, dipole and panel antennas, power supplies, media converters, cables, and connectors where desired. Partnering with Accu-Tech provides you with the peace-of-mind that the systems installed in your facility will be high-performance and reliable.

The WiFi bollard should be designed specifically for wireless applications. Terms of Sale | Terms of Use | Privacy Policy. Fiberglass interior equipment stand for mounting APs and antennas minimizes impact on wireless signals, Performance: Designed to protect equipment from tampering, spilling liquids and weather. The fiberglass cylinder. Buy the Oberon WI-FI BOLLARD AP ENCLOSURE at a super low price. The fiberglass cylinder is virtually transparent to wireless signal. 12 in. Permanently mounts on poured concrete pedestal. MFR PART # 3030-00-BK. Exterior walls of buildings are often off-limits for WiFi due to architectural concerns.

(318 mm) inner diameter. The bollard color is in the fiberglass resin, so it won’t scratch or chip.

Place the access point close to where Wi-Fi clients will aggregate, such as building entrances, bus stops, swimming pools, and parking lots. These locations are difficult for installing WiFi access points because there are neither ceilings nor walls to mount the APs. Diameter Netpoint™ Rotomolded Polyethylene Plastic Wi-Fi Access Point Bollard Category: Netpoint Model 3032 Oberon's NetPoint™ 3032 Wireless Bollard is a cost effective way to extend wireless and Wi-Fi coverage into auditoriums, sports venues, courtyards, malls, and campus open areas permanently or temporarily. thick steel anchor base. The fiberglass construction is virtually transparent to wireless signal. The bollard is comprised of a durable weatherproof fiberglass shaft and adjustable interior equipment stand that allows the installer to place and conceal the AP, dipole and panel antennas, power supplies, media converters, cables, and connectors where desired. The WiFi bollard places the AP and the antenna at an acceptable height above the ground without being conspicuous, and is in a form factor acceptable to many landscape and building architects and property owners. We distribute and deliver complete and integrated solutions for a variety of applications. thick, UV and cleaning chemical resistant UL-94HB Polyethylene plastic. Oberon’s WiFi Bollard is a rugged, standalone mount for indoor- or outdoor-rated access points. You may need to import it above. Oberon’s WiFi bollard is a 54” tall non metallic bollard designed to conceal indoor and outdoor APs and antennas from most vendors.

Oberon’s Model 3030-AB Anchor Base WiFi Bollard is ideal for extending WiFi coverage into lobbies, auditoriums, sports venues, courtyards and parks. PART # 957048. This rugged fiberglass bollard is weather proof and tamper resistant, and is designed to protect wireless equipment in open public areas. The WiFi bollard can be mounted on either a prepared pedestal or anchor base (Model 3030-AB). The wireless bollard can be used to mount the Wi-Fi APin locations where Wi-Fi coverage is most needed, and avoiding the need to mount on buildings or light poles. Nordenskiöldsgatan 24 Conductors entering buildings from outside should be appropriately surge/lightning protected. TigerDirect Business is not responsible for typographical or photographic errors. The bollard can be placed virtually anywhere wireless coverage is needed outdoors. Partnering with Accu-Tech provides you with the peace-of-mind that the systems installed in your facility will be high-performance and reliable. Polyethylene plastic bollard is virtually transparent to wireless signals, Anchors to pre-installed concrete pedestal. The bollard is comprised of a durable weatherproof fiberglass shaft and adjustable interior equipment stand that allows the installer to place and conceal the AP, dipole and panel antennas, power supplies, media converters, cables, and connectors where desired. Add the font family you wish to use. Oberon’s WiFi bollard is a rugged, standalone mount for indoor- or outdoor-rated access points. The outdoor installation creates its own challenges for the premise network designer and installer (NDI) as it involves Outside Plant considerations, which are different from day-to-day indoor network installation challenges. The WiFi bollard can be used to mount the AP in locations where a ceiling or wall mount is not available or aesthetically unacceptable. The bollard is designed for indoor or outdoor APs with external antennas and protects the AP and antennas from weather and tampering. Call for Availability. For additional information, including Oberon product CAD files, contact customer service.

Oberon’s Model 3030-AB Anchor Base WiFi Bollard is ideal for extending WiFi coverage into lobbies, auditoriums, sports venues, courtyards and parks. † Where this symbol appears, it means the product has been factory recertified. Oberon’s NetPost 3030 Wireless Bollard is ideal for extending wireless and Wi-Fi coverage into open public spaces such as parks, outdoor malls, and bus stops. Topics: BIMobject® Corporation, acknowledged by investors with a Global Red Herring 100 award, and a public company on NASDAQ OMX: ticker BIM. manualzz provides technical documentation library and question & answer platform.Its a community-based project which helps to repair anything. here Zinc coated, 0.25 in. The employees of Oberon wish you well during the current healthcare crisis. Oberon Oberon’s Wi-Fi Bollards are comprised of an internal anchor base, an equipment stand for antennas and access points, the bollard cover, and, optionally, a UL listed, NEMA 4 workbox for AC line powered circuits. Write Your Own Review.

The WiFi bollard is large enough to enclose the AP, antennas, power supplies, and associated equipment, and provides protection from tampering, abuse, and weather. Designed to protect APs and antennas in outdoor public spaces. Fiberglass equipment mounting stand. We distribute and deliver complete and integrated solutions for a variety of applications.

†† Coupons cannot be combined with any other coupon, offer, sale or discount. • MODEL 3032 - “Medium Duty” Polyethylene construction. https://oberoninc.com/docs/_Instructions/Oberon_Model_3032_Instructions.pd... Data Voice or Multimedia Network Equipment or Platforms and Accessories, Data Communications Wireless Access Points, Design: Cylindrical polyethylene plastic Wi-Fi bollard. Wi-Fi integrators often need to extend the premise network into outdoor areas in college, healthcare, and corporate campuses, and in smart city applications. Coupons are not applicable to prior orders. (2) 1/4-20 Hex Pin in Bit Tamper Resistant Screws. Oberon has developed the Wi-Fi Bollard™ as a purpose-built, stand-alone facility to assist the Wi-Fi network designer and installer achieve multiple objectives which otherwise are difficult to attain. Use antennas (directive or omni-directional) suitable for the application. Get insider deals first, exclusivepromotions and more delivered toyour inbox each week. Cabling is conducted through conduit in pedestal. Designed to protect a.c. line powered equipment in open public spaces such as public parks, malls, and streets. Print. Hospitals will frequently provide outdoor Wi-Fi in entry ways, parking lots and garages, screening areas, and outdoor patient areas. How do you rate this product? */, {% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */, {% set pageCenter = "1100px" %} /* This sets the width of the website */, {% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */, {% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */, {% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */, {% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */, {% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */. Accu-Tech is a national distributor of Voice, Data, AV, Wireless and Security solutions. Click here to contact your local Accu-Tech representative. Our unique solutions for manufacturers provide development, hosting, maintenance, syndication and publication of the digital replicas of manufactured products – BIM objects. The WiFi bollard can be used to mount the AP in locations where a ceiling or wall mount is not available or aesthetically unacceptable. Size: 57 in. The Qr code includes the static URL below and will bring you back to this page if scanned by a device like iPhone or smartphone, https://www.bimobject.com/en/chatsworthproducts/product/oberon-3032-00-bollard. Wi-Fi Bollards assist the NDI with outdoor Wi-Fi in the following manner: Oberon’s Wi-Fi Bollards come in two styles- the general purpose Model 3032, which has a low-loss rotomolded polyethelene plastic bollard, and the heavy-duty Model 3030, which has a low-loss, cast fiberglass bollard. We are the world's largest and fastest growing digital content management system for BIM objects. Change.